The curved bullet scene in Wanted (2008) wasn’t the first time someone thought of the idea of bullets traveling around corners. In reality, during World War II, the German Army dedicated a lot of time and resources to developing and deploying a gun attachment called the Krummlauf for this very purpose.
The German Army’s hopes for the Krummlauf
The Krummlauf was developed in 1943, after the German Army began researching an attachment that could change the course of bullets fired through the straight barrels of typical assault rifles and machine guns. They originally tried to attach a 20 mm curved barrel to an eight mm rifle, before landing on the final design.
The attachment would be equipped to the MP 44 (StG 44), to allow soldiers to shoot at targets without the risk of being hit by return fire. The plan was to provide each infantryman operating an MP 44 with a Krummlauf, with the ultimate aim being to swing the tide of the Second World War in Germany’s favor.
Use by German infantrymen
The infantry version of the Krummlauf, dubbed the “I” variant, was 14 inches long and featured a 30-degree bend to the barrel. Its configuration began with a four-inch straight barrel, followed by a five-and-a-half-inch curved section, and finished with another four-and-a-half-inch straight part. Along with being paired with the StG 44, it could also be attached to the MG 42.
A mirror was used to let operators see where they were aiming
The variant used by infantrymen included a mirror that allowed the operator to see exactly where and what they were aiming at, without compromising their position. As stated by The Armory Life, “Using the curved barrel, a German gunner would be at least 20 cm below the edge of his foxhole or whatever cover he was using.”
They could also maintain a cheek weld stance with the use of a front sight mounted on the end of the Krummlauf. A rear sight was also attached behind the mirror.
Equipped by the Elefant tank destroyer
The tank variant of the Krummlauf had four different versions: a 30, 45 and 60-degree barrel, as well as one coming in at a more severe 90-degree angle, dubbed the “Versatz P.” This model was designed to allow the rifle to be positioned vertically, to reduce the amount of space it took up. The intent was to mount it on a hemispherical steel ball with a cup joint, with the ability to tuck the curved barrel into a port in the vehicle’s armor.
This version of the Krummlauf was initially intended to be equipped by the Elefant tank destroyer. Approximately 500 were produced and delivered, along with 1,500 specially-designed sights.
Problems with the Krummlauf
When the US military got ahold of the Krummlauf following World War II, officials tested at the Aberdeen Proving Ground in Maryland. Those charged with conducting the tests quickly discovered the attachment was essentially a failure, as it had a very short lifespan. It was originally expected the Krummlauf would survive 6,000 rounds being fired. In reality, the 30-degree version managed a lifespan of just 300, while the 45-degree variant survived only 160.
New! Want to become a trivia master? Sign up for our War History Fact of the Day newsletter!
More from us: The Mosin-Nagant Has Seen Over a Century of Service
When a round was fired, the bullet experienced so much friction as it traveled through the barrel that it would heat to extremely high temperatures. By the time it left the muzzle, it would shatter, creating an effect similar to that of a shotgun. This made the Krummlauf only effective in close-range use.
Leave a Comment