The German Gewehr 43 Semi-Automatic Rifle Was Inspired By the Soviet SVT-40

Photo Credit: Wolfram Eberhard Venohr / Pix / Michael Ochs Archives / Getty Images

With the commencement of Operation Barbarossa, the Germans faced numerous unexpected hurdles. While historians often emphasize the role of adverse weather conditions, it’s important to recognize that the Red Army had equipped its troops with notably more advanced weaponry than the Wehrmacht.

In reaction to this technological gap, the Germans introduced the Gewehr 43, a semi-automatic rifle that marked a substantial improvement over its predecessors, the G41(M) and G41(W).

The G41(M) and G41(W) had their faults

G41(W), the variant of the Gewehr 41 manufactured by Walther Arms. (Photo Credit: Armémuseum / Wikimedia Commons / Public Domain)

The development of the Gewehr 43 aimed to address the shortcomings of its predecessors, the G41(M) and G41(W). These battle rifles, produced by Mauser and Walther Arms, were introduced into service with the Wehrmacht in 1941 and remained in use until the conclusion of the Second World War. Both had issues, largely stemming from the constraint of not drilling gas ports into their barrels, rendering them impractical for effective use on the battlefield.

The G41(M) earned a reputation for being overly complex, cumbersome and heavy. Operators struggled to achieve accurate shots due to the sight’s placement on the gas tube at the barrel’s front, leading to misalignment after prolonged use. Despite producing over 6,600 units during World War II, 1,673 had to be returned due to their shortcomings.

While the G41(W) fared somewhat better, it still encountered challenges. Combat reliability issues persisted, and reloading posed significant difficulties due to its fixed magazine fed by two clips. Additionally, both the G41(W) and G41(M) suffered from muzzle corrosion caused by the use of corrosive salts in the ammunition primer.

Assembling and cleaning these rifles on the battlefield presented further challenges due to their tight-fitting parts.

Developing the Gewehr 43

Red Army soldiers equipped with SVT-40s. (Photo Credit: RIA Novosti Archive, Image #613474 / Alpert / Wikimedia Commons CC BY-SA 3.0)

The challenges associated with the G41(M) and G41(W) weren’t the sole reasons for the development of the Gewehr 43. When the Germans launched Operation Barbarossa, the invasion of the Soviet Union in 1941, they were taken aback by the advanced firearms wielded by the Red Army. Unknown to German officials, the Soviets had re-equipped their infantry with more potent weaponry, prominently the SVT-40.

The SVT-40, a semi-automatic rifle, used a straightforward gas mechanism powered by a port cut into the barrel. It introduced a modern box magazine, surpassing the performance of the Wehrmacht‘s rifles. In response to this gap, Walther Arms designed the G43, incorporating elements from the G41(W), along with a comparable gas system to the Soviet rifle. This weapon proved to be lighter, more robust, tougher and easier to manufacture, leading to the production of 402,713 units during World War II.

Manufacturing of the G43 was undertaken by Walther, Wilhelm Gustloff-Werke and Berlin-Lübecker Maschinenfabrik. Certain parts were also produced through forced labor at Buchenwald and Neuengamme concentration camps.

Shortly after its deployment on the battlefield in April 1944, the G43 underwent a name change to Karabiner 43. This alteration was prompted by the fact that the term Gewehr, meaning “long rifle,” didn’t accurately apply, given its barrel was two cm shorter than the standard-issue Karabiner 98k.

Related Post

Gewehr 43 specs

Gewehr 43 at a re-enactment in Lowell, Indiana. (Photo Credit: Lyle / Flickr CC BY-NC 2.0)

The Gewehr 43 proved to be a robust and economical semi-automatic rifle, weighing 9.7 pounds and measuring 43.8 inches in length, with a 21.5-inch barrel constituting just under half of that dimension. The standard-issue variants were equipped with iron sights, including a hooded pointed-post-type front sight and a tangent-type rear sight. Approximately 55,335 sniper versions of the G43 were manufactured, featuring the Zf42 scope.

Like several other German-made firearms, the G43 utilized the 7.92 x 57 mm Mauser cartridge. Ammunition could be fed through either five-round stripper clips, allowing reloading without removing the magazine, or a 10-round stamped-steel detachable box magazine. Typically, soldiers in the field carried a G43 pouch containing two spare magazines and one stripper clip pouch.

The G43 exhibited a muzzle velocity ranging from 746-776 m/s, with a rate of fire of 30 rounds per minute. The standard version had an effective range of 500 meters, while those equipped with the sniper scope could engage targets at distances of up to 800 meters.

When the name was changed from G43 to Karabiner 43, an undisclosed number of rifles underwent modifications to fire the 7.92 x 33 mm Kurz cartridge and utilize magazines compatible with the StG44 assault rifle.

Disorganized use during the Second World War

Re-enactment of a German soldier aiming a Gewehr 43. (Photo Credit: zaphad1 / Flickr CC BY 2.0)

Upon its introduction into service with the Wehrmacht in October 1943, the initial plan was to supply each infantry company with 19 Gewehr 43s, 10 of which would be equipped with the Zf42 sniper sight. However, this goal was never fully realized due to the prevailing conditions within the German Army at the time. As the Allied forces continued their successful advance across Europe, military authorities struggled to effectively distribute the rifle.

Nevertheless, the G43 found regular use among German special units, who lauded its self-loading capabilities, durability and firepower. Its ruggedness was further evidenced by instances of Gebirgsjäger troops using it as makeshift ladder rungs during mountain climbs.

The Czech Army found the Gewehr 43’s sniper capabilities appealing

Soldiers with the National People’s Army (NPA) of the German Democratic Republic (GDR) carrying Gewehr 43s during the Changing of the Guard, 1971. (Photo Credit: Wolfram Eberhard Venohr / Pix / Michael Ochs Archives / Getty Images)

Following the Second World War, the Gewehr 43 was adopted by the Czechoslovak Army, which found the rifle’s capabilities as a sniper weapon particularly appealing. It remained in service in Czechoslovakia for several years, and was later adopted in East Germany by the Deutsche Volkspolizei and the Border Troops of the German Democratic Republic.

More from us: Schwarzlose MG: The Unusual Austro-Hungarian Machine Gun of World War I

Outside of Czechoslovakia and East Germany, the G43 also saw use in Romania and during the First Indochina War, with French soldiers armed with the semi-automatic rifles. Guatemala also purchased a handful of them from Czechoslovakia prior to the 1954 coup d’etat, while Brazil manufactured its own variant, the M954 Mosquetão. However, it was never fully adopted.

Clare Fitzgerald: Clare Fitzgerald is a Writer and Editor with eight years of experience in the online content sphere. Graduating with a Bachelor of Arts from King’s University College at Western University, her portfolio includes coverage of digital media, current affairs, history and true crime. Among her accomplishments are being the Founder of the true crime blog, Stories of the Unsolved, which garners between 400,000 and 500,000 views annually, and a contributor for John Lordan’s Seriously Mysterious podcast. Prior to its hiatus, she also served as the Head of Content for UK YouTube publication, TenEighty Magazine. In her spare time, Clare likes to play Pokemon GO and re-watch Heartland over and over (and over) again. She’ll also rave about her three Maltese dogs whenever she gets the chance. Writing Portfolio Stories of the Unsolved
Leave a Comment