There’s Almost A Zero Percent Chance of Survival for Anything (Or Anyone) Hit By The Sabot Round

Photo Credit: DoD / Getty Images
Photo Credit: DoD / Getty Images

The sabot round is a specialized type of tank ammunition utilized in armored combat. This anti-tank projectile, devoid of any explosives, is engineered to achieve accurate strikes on targets, effectively disabling enemy forces. Due to its deadly nature, the sabot round provides little to no chance of survival for those it hits, making it a favored option for military engagements.

Inner workings of the Sabot round

120 mm M829A2 round on display
120 mm M829A2 round. (Photo Credit: US Army / Wikimedia Commons / Public Domain)

The sabot round is engineered to entirely enclose a sub-caliber flight projectile within the barrel, maximizing its exposure to propellant gases for improved muzzle velocity. This design ensures effective propulsion even in the face of aerodynamic challenges.

When fired, the sabot stabilizes the projectile during its flight, separating smoothly upon exiting the muzzle. The projectile, typically a slender rod made of depleted uranium, accelerates to speeds of approximately 3,500 MPH, ideal for piercing armor.

Upon impact, it disintegrates, causing a catastrophic effect often described by soldiers as capable of liquefying everything, including occupants, inside targeted tanks or armored vehicles.

The cup and expanding cup sabot rounds

Diagram showing the workings of the 125 mm BM15 armor-piercing fin-stabilized discarding sabot (APFSDS) round
125 mm BM15 armor-piercing fin-stabilized discarding sabot (APFSDS) round. (Photo Credit: US Navy / Wikimedia Commons / Public Domain)

There are five different types of sabot rounds. The cup sabot supports the base of the projectile and offers structural support around the shaft. It’s typically used in small arms ammunition, as well as smoothbore shotgun and muzzleloader projectiles.

The expanding cup sabot is similar to the cup round, in that it’s used for rifled small arms. However, when fired, the centrifugal force from the rotation of the projectile causes the segments surrounding it to open up. This introduces more surface area to the surrounding air pressure, releasing it.

Other types of sabot rounds

Diagram of the base sabot.
Diagram showing how the base sabot works. (Photo. Credits: Benchill / Wikimedia Commons CC BY-SA 3.0).

The base sabot has a one-piece base that supports the bottom of the projectile, as well as separate pieces that surround the sides and center, breaking away once the round has been fired. This sabot is considered superior to the previous two, as it offers a cleaner and better sabot-projectile separation. However, it’s more expensive to produce.

The spindle sabot is typically used in large caliber armor-piercing ammunition. It uses between two and four longitudinal rings with a center section that makes contact with the projectile. The front centers the projectile in the barrel and provides an air scoop to help with its separation from the sabot, while the rear seals the propellant gases with an obturator ring along the outside diameter.

Finally, the ring sabot uses the projectile’s rear fins to center it, forming a single ring around the front with an obturator ring to seal the gases. This type of sabot was favored by the Soviet Union, as the steel from which it was constructed could withstand launch accelerations without needing a ramp to support the projectiles.

Multiple generations of sabot round munitions

Sgt. Devon Myers carrying a sabot round
Sgt. Devon Myers, a tank commander with Company C, 1st Battalion, 64th Armor Regiment, carries a 120 mm sabot round to his tank for engagements at Fort Stewart-Hunter Army Airfield, Georgia, 2016. (Photo Credit: Spc. Ryan Tatum / Wikimedia Commons / Public Domain)

The M829A1, known as the “Silver Bullet,” is an armor-piercing fin-stabilized discarding sabot (APFSDS) round. It has a long-rod, uranium-depleted projectile that’s about 1.25 inches wide. Once it hits its target, it punches through armor and typically explodes an enemy tank in what tankers call a “jack in the box” effect.

According to Sofrep, the M829A1 “is widely regarded as the most effective tank-fired (M1 Abrams 120mm main gun) anti-armor weapons in the world. It overwhelmed Iraqi armor during Operation Desert Storm. The M829A1 is a depleted-uranium long-rod kinetic energy penetrator round capable of defeating heavily armored vehicles.”

Since then, multiple generations of the round have been developed. The M829A2 improved the structural quality of the uranium-depleted projectile, while the M829A3 made the propellant more efficient to boost muzzle velocity. The M829A4 uses a uranium-depleted projectile with a three-petal composite sabot.

Use during Operation Desert Storm

Tank firing a sabot round
A Sabot round goes down range at Marine Corps Air Ground Combat Center Twentynine Palms during Company A, 1st Tank Battalion’s annual gunnery qualification, 2013. (Photo Credit: Cpl. Sarah Dietz / U.S. Marine Corps / Wikimedia Commons / Public Domain).

Want War History Online‘s content sent directly to your inbox? Sign up for our newsletter here!

The M1A2 Abrams tank was used throughout Operation Desert Storm and fired 120 mm M829 sabot rounds at enemy armored vehicles; the projectiles took out multiple tanks as they dominated the battlefield. M829 sabot rounds are best used in armored warfare, rather than toward buildings or walls, so were thoroughly employed by the US military throughout the Gulf War.

Samantha Franco

Samantha Franco is a Freelance Content Writer who received her Bachelor of Arts degree in history from the University of Guelph, and her Master of Arts degree in history from the University of Western Ontario. Her research focused on Victorian, medical, and epidemiological history with a focus on childhood diseases. Stepping away from her academic career, Samantha previously worked as a Heritage Researcher and now writes content for multiple sites covering an array of historical topics.

In her spare time, Samantha enjoys reading, knitting, and hanging out with her dog, Chowder!

linkedin.com/in/samantha-v-franco