The sabot round is a specialized type of tank ammunition utilized in armored combat. This anti-tank projectile, devoid of any explosives, is engineered to achieve accurate strikes on targets, effectively disabling enemy forces. Due to its deadly nature, the sabot round provides little to no chance of survival for those it hits, making it a favored option for military engagements.
Inner workings of the Sabot round
The sabot round is engineered to entirely enclose a sub-caliber flight projectile within the barrel, maximizing its exposure to propellant gases for improved muzzle velocity. This design ensures effective propulsion even in the face of aerodynamic challenges.
When fired, the sabot stabilizes the projectile during its flight, separating smoothly upon exiting the muzzle. The projectile, typically a slender rod made of depleted uranium, accelerates to speeds of approximately 3,500 MPH, ideal for piercing armor.
Upon impact, it disintegrates, causing a catastrophic effect often described by soldiers as capable of liquefying everything, including occupants, inside targeted tanks or armored vehicles.
The cup and expanding cup sabot rounds
There are five different types of sabot rounds. The cup sabot supports the base of the projectile and offers structural support around the shaft. It’s typically used in small arms ammunition, as well as smoothbore shotgun and muzzleloader projectiles.
The expanding cup sabot is similar to the cup round, in that it’s used for rifled small arms. However, when fired, the centrifugal force from the rotation of the projectile causes the segments surrounding it to open up. This introduces more surface area to the surrounding air pressure, releasing it.
Other types of sabot rounds
The base sabot has a one-piece base that supports the bottom of the projectile, as well as separate pieces that surround the sides and center, breaking away once the round has been fired. This sabot is considered superior to the previous two, as it offers a cleaner and better sabot-projectile separation. However, it’s more expensive to produce.
The spindle sabot is typically used in large caliber armor-piercing ammunition. It uses between two and four longitudinal rings with a center section that makes contact with the projectile. The front centers the projectile in the barrel and provides an air scoop to help with its separation from the sabot, while the rear seals the propellant gases with an obturator ring along the outside diameter.
Finally, the ring sabot uses the projectile’s rear fins to center it, forming a single ring around the front with an obturator ring to seal the gases. This type of sabot was favored by the Soviet Union, as the steel from which it was constructed could withstand launch accelerations without needing a ramp to support the projectiles.
Multiple generations of sabot round munitions
The M829A1, known as the “Silver Bullet,” is an armor-piercing fin-stabilized discarding sabot (APFSDS) round. It has a long-rod, uranium-depleted projectile that’s about 1.25 inches wide. Once it hits its target, it punches through armor and typically explodes an enemy tank in what tankers call a “jack in the box” effect.
According to Sofrep, the M829A1 “is widely regarded as the most effective tank-fired (M1 Abrams 120mm main gun) anti-armor weapons in the world. It overwhelmed Iraqi armor during Operation Desert Storm. The M829A1 is a depleted-uranium long-rod kinetic energy penetrator round capable of defeating heavily armored vehicles.”
Since then, multiple generations of the round have been developed. The M829A2 improved the structural quality of the uranium-depleted projectile, while the M829A3 made the propellant more efficient to boost muzzle velocity. The M829A4 uses a uranium-depleted projectile with a three-petal composite sabot.
Use during Operation Desert Storm
Want War History Online‘s content sent directly to your inbox? Sign up for our newsletter here!
The M1A2 Abrams tank was used throughout Operation Desert Storm and fired 120 mm M829 sabot rounds at enemy armored vehicles; the projectiles took out multiple tanks as they dominated the battlefield. M829 sabot rounds are best used in armored warfare, rather than toward buildings or walls, so were thoroughly employed by the US military throughout the Gulf War.
Leave a Comment